cart   (0 items)  | Total: £0.00

Riggers - Pins

All prices are for units of 1 piece, except where stated otherwise.
Prices are in GBP£ and do not include VAT or delivery.

Rig1 pins were used on all boats up until Aug 2008. They all have 13mm shafts, with 8x27mm threaded tops, and supplied complete with washers, nuts and spacers.
no-image.png
Rig1-sc
13x105mm shaft
Material: Stainless
Standard for Swift: See each option
£ 16.00
Rig1A-sc: 10x55mm base / Standard: ~08/2008
Rig1B-sc: 10x30mm base - for scull L block / Standard: ~08/2008
Rig1C-sc: 12x55mm base - for scull Euro, Gull, scull & sweep Al. wing / Standard: ~08/2008
Rig1D-sc: 13x105mm shaft, 12x30mm base / Standard: no
no-image.png
Rig1-sw
13x120mm shaft
Material: Stainless
Standard for Swift: See each option
£ 16.00
Rig1A-sw: 10x55mm base / Standard: no
Rig1B-sw: 10x30mm base - for sweep L block / Standard: ~08/2008
Rig1C-sw: 12x55mm base - for sweep Euro / Standard: ~08/2008
Rig1D-sw: 13x120mm shaft, 12x30mm base / Standard: No
Rig2 pins are used on all boats since Aug 2008. They all have 13mm shafts, with 8mm thread hole in tops, and supplied complete with washers, nuts, bolts and spacers.
no-image.png
Rig2-sc
13x105mm shaft - 8mm bolt type
Material: Stainless
Standard for Swift: See each option
£ 16.00
Rig2A-sc: 10x55mm base / Standard: No
Rig2B-sc: 10x30mm base - for scull L block / Standard: 09/2008~
Rig2C-sc: 12x55mm base - for scull Euro, scull & sweep Ali. wing / Standard: 09/2008~
Rig2D-sc: 12x30mm base / Standard: No
no-image.png
Rig2-sw
13x120mm shaft - 8mm bolt type
Material: Stainless
Standard for Swift: See each option
£ 16.00
Rig2A-sw: 10x55mm base / Standard: No
Rig2B-sw: 10x30mm base - for sweep L block / Standard: 09/2008~
Rig2C-sw: 12x55mm base - for sweep Euro / Standard: 09/2008~
Rig2D-sw: 12x30mm base / Standard: No
Rig3A.jpg
Rig3A
13x100mm shaft - for ali back rigger (incl. washers, bolts and spacers)
Material: Aluminium
 09/2008~
£ 12.00